Back to Blog
How-to Guides 2026-11-17 BOSS Audio Systems | Life at Full Volume 0 views

850BRGB In-Dash Receiver: RGB Lighting and Wiring Guide

850BRGB In-Dash Receiver: RGB Lighting and Wiring Guide

Plan your 850BRGB install around its true Double-DIN fit, Bluetooth pairing, RGB illumination, and 80W x 4 output. Practical wiring and setup guidance inside.

Start with the 850BRGB's true Double-DIN fit

The 850BRGB is a true Double-DIN receiver, so the first thing to confirm is that your vehicle's dash opening is sized for a Double-DIN unit. If your car came with a single-DIN radio, you will likely need a dash kit to fill the extra space. Check your vehicle's specific dash kit requirements before you buy anything else.

Because the 850BRGB is a full Double-DIN chassis, plan for depth behind the dash as well. Factory wiring bundles, climate control ducts, and support brackets can all interfere with a deeper radio body. Pull the old unit out first and measure the available depth before you commit to the install.

850BRGB catalog facts that shape your install plan

  • 850BRGB: True Double-DIN Fit Confirms the chassis size so you can verify your dash opening and choose the right dash kit before starting.
    850BRGB
    850BRGB
  • 850BRGB: 80 Watts x 4 Channel Tells you the receiver's built-in amplification is designed to drive four speakers, so plan your speaker wiring accordingly.
  • 850BRGB: Bluetooth® Hands-free Built-in Bluetooth means you can pair a phone for hands-free calling without adding a separate module.
  • 850BRGB: Multicolor Illumination The RGB lighting is a built-in feature, so you can coordinate the look with your dash without extra lighting hardware.
  • 850BRGB: Wireless Remote Control A remote is included, so you can keep it accessible without reaching for the faceplate while driving.

A practical order for 850BRGB wiring and first power-up

Work through these steps in sequence so you can catch problems before the dash goes back together.

  1. Disconnect the battery: Always disconnect the negative battery terminal before touching vehicle wiring. This protects both you and the receiver.
  2. Remove the old radio and inspect the cavity: Pull the existing unit, check for clearance, and note any brackets or obstacles that could block a Double-DIN chassis.
  3. Connect the wiring harness: Match the 850BRGB's harness to your vehicle's adapter. The catalog confirms 80W x 4 channel output, so plan for four speaker leads plus power, ground, and accessory connections. Double-check each connection before crimping or soldering.
  4. Connect the Bluetooth microphone if using hands-free: The 850BRGB supports Bluetooth hands-free calling. Route any microphone cable to a clear spot before you slide the unit in.
  5. Slide the receiver into the dash: Seat the 850BRGB fully into the Double-DIN opening and secure it according to your dash kit's instructions.
  6. Reconnect the battery and test: Power on the receiver and check that it boots, the display lights up, and the AM/FM tuner responds before you reassemble the dash trim.

Setting up the RGB lighting on the 850BRGB

The 850BRGB's multicolor illumination is built into the receiver, so there is no separate lighting controller to wire. Once the unit is powered, use the receiver's controls to cycle through the available colors and pick one that matches your dash lighting.

If you want the lighting to stay consistent, set it once and leave it. The catalog does not specify how many colors are available or whether the brightness is adjustable, so check the on-screen or button controls after first power-up to see what the receiver offers.

Lighting and tuner facts from the catalog

  • 850BRGB: Multicolor Illumination Confirms the RGB lighting is integrated, so you can set the color from the receiver without extra wiring.
  • 850BRGB: Switchable US & EU Tuner Frequencies Lets you match the tuner to your region's AM/FM spacing, which matters if you drive across regions or imported the vehicle.
  • 850BRGB: AM/FM Receiver Confirms standard radio reception is built in, so you can test the tuner during first power-up.

Pairing your phone to the 850BRGB over Bluetooth

The 850BRGB supports Bluetooth hands-free calling. Pairing is straightforward once the receiver is powered and your phone's Bluetooth is on.

  1. Enable Bluetooth on your phone: Open your phone's Bluetooth settings and make sure it is turned on and searching for devices.
  2. Put the 850BRGB in pairing mode: Use the receiver's controls to enter Bluetooth pairing mode. The exact button or menu path depends on the receiver's interface, so check the on-screen prompts.
  3. Select the 850BRGB on your phone: Your phone should list the receiver by name. Tap it to pair. If prompted for a code, check the receiver's display or documentation for the default.
  4. Test a call: Once paired, place a test call to confirm the hands-free connection works and the microphone is positioned correctly.

Using push-to-talk and the wireless remote

The 850BRGB includes a push-to-talk feature, which lets you activate your phone's voice assistant from the receiver. The catalog confirms push-to-talk is supported, but the specific button and setup steps depend on your phone and the receiver's menu, so test it after pairing.

The included wireless remote control gives you another way to adjust volume and settings without reaching for the faceplate. Keep it within reach and store it securely when not in use.

Car stereo wiring tips that apply to the 850BRGB

These general wiring practices help you avoid common problems during any in-dash receiver install.

  • Use a wiring harness adapter: A vehicle-specific adapter lets you connect the 850BRGB without cutting factory wiring, which keeps the install reversible.
  • Solder and heat-shrink connections: Crimp connectors work, but soldered and heat-shrunk joints resist vibration and corrosion better over time.
  • Label wires before you connect them: Speaker, power, ground, and accessory leads can look similar. Labeling them prevents mix-ups that are hard to trace later.
  • Keep signal and power wires separated: Route speaker-level and power wires away from each other where possible to reduce the chance of noise pickup.
  • Check the ground connection: A clean, tight ground to bare metal is essential. A poor ground can cause the receiver to reset or behave unpredictably.

Updating the 850BRGB via USB

The 850BRGB supports updates via USB. The catalog confirms USB update capability but does not specify the file format, update procedure, or whether a specific USB drive type is required. Check the receiver's documentation or the manufacturer's support page for the correct update file and steps before attempting an update.

As a general precaution, keep the vehicle powered or use a battery maintainer during any firmware update so the receiver does not lose power mid-process.

What the 850BRGB catalog does not confirm

The supplied catalog information confirms the 850BRGB's Double-DIN fit, Bluetooth hands-free, multicolor illumination, AM/FM tuner with switchable US and EU frequencies, push-to-talk, wireless remote, USB update capability, and 80W x 4 channel output.

It does not specify preamp outputs, subwoofer control, screen size, touchscreen capability, or the exact number of illumination colors. It also does not provide a wiring diagram, speaker impedance range, or detailed Bluetooth pairing steps. For those details, refer to the receiver's documentation or contact BOSS Audio Systems support before you finalize your install plan.

Related Articles

Customer Service
Home
Products
Cart
Profile