Back to Blog
Buying Guides 2026-11-14 BOSS Audio Systems | Life at Full Volume 0 views

CH5730B Speakers: What to Know Before You Buy

CH5730B Speakers: What to Know Before You Buy

A practical CH5730B buying guide covering the 5 x 7 fitment, 3-way speaker features, and the specs you need to check before ordering this Chaos Exxtreme pair.

The CH5730B is a fit-first purchase

The BOSS Audio Systems CH5730B is a 5" x 7" full-range speaker from the Chaos Exxtreme series, built as a 3-way system for clear, full sound. That size is the first thing to settle: if your vehicle or enclosure does not accept a 5 x 7 speaker, the rest of the specs will not rescue the install.

This guide focuses on what the catalog actually confirms about the CH5730B, what those numbers mean for your decision, and where the supplied information stops short of answering a fitment question.

CH5730B dimensions that decide fitment

  • CH5730B: 5" x 7" size with 2.0625 mounting depth and 4.88 mounting hole These are the three numbers to compare against your opening and available depth before ordering. A 5 x 7 opening is not the same as a 6 x 9 or a round cutout, and the 2.0625 mounting depth tells you how much clearance behind the mounting surface the speaker needs.
    CH5730B
    CH5730B

What the 3-way design gives you

  • 3-way speaker system: The CH5730B splits sound across multiple drivers rather than relying on a single full-range cone. That is the core of the Chaos Exxtreme series promise of clear, full sound.
  • 1" (25 mm) and 0.5" (13 mm) tweeters: Two tweeter sizes are part of the 3-way layout. The catalog lists the sizes but does not publish crossover points, frequency response, or power handling, so treat the tweeter sizes as a design description rather than a performance guarantee.
  • Poly injection cone with rubber surround: The cone and surround materials are the moving parts of the speaker. The catalog names them as build features; it does not make a durability or weather-resistance claim, so do not assume marine or off-road sealing from this listing alone.
  • Stamped steel basket: The basket is the frame that holds the speaker together and mounts to your opening. Stamped steel is the standard construction named in the record.

Where the CH5730B specs stop short

The supplied record does not include power handling, impedance, sensitivity, frequency response, or grille and hardware contents. That matters for a buying decision because those are the numbers most often used to match a speaker to an amplifier or head unit.

The absence of those figures in the supplied information is a limitation of this listing, not proof that the product lacks them. If your purchase depends on a specific power rating or impedance match, confirm those details with the seller or the manufacturer before ordering rather than guessing from the 3-way description.

Are CH5730B speakers worth it for your setup?

At a catalog price of USD 33.27 against a comparison price of USD 51.99, the CH5730B sits in budget-speaker territory. The value case is strongest when three things line up: your opening is genuinely 5 x 7, you have at least 2.0625 of mounting depth, and you want a 3-way layout with separate tweeters rather than a basic single-cone replacement.

The case weakens if you need documented power handling, a confirmed impedance figure, or marine-rated construction. None of those are confirmed by the supplied information, so a buyer who needs them should verify first. For a straightforward 5 x 7 replacement where the dimensions fit, the CH5730B is a low-cost way to add a 3-way speaker design.

A pre-purchase check for the CH5730B

  1. Measure the opening: Confirm your cutout matches the 5" x 7" size and the 4.88 mounting hole figure in the catalog. Measure the actual opening rather than relying on the vehicle's nominal speaker size.
  2. Check depth behind the surface: The speaker needs 2.0625 of mounting depth. Look for window mechanisms, wiring, or trim behind the mounting location that could block it.
  3. Decide whether the 3-way layout suits your goal: The CH5730B uses 1" (25 mm) and 0.5" (13 mm) tweeters in a 3-way system. If you specifically want a simple full-range replacement, a 3-way design is a different choice, not automatically a better one.
  4. Confirm the figures the catalog omits: Power handling, impedance, and included hardware are not in the supplied record. Ask before you buy if your amplifier match or install plan depends on them.

Related Articles

Customer Service
Home
Products
Cart
Profile