Back to Blog
Comparisons 2026-11-13 BOSS Audio Systems | Life at Full Volume 0 views

OX4.400 vs R1100M-S: Which BOSS Amplifier Fits Your Setup?

OX4.400 vs R1100M-S: Which BOSS Amplifier Fits Your Setup?

Compare the OX4.400 4-channel and R1100M-S monoblock amplifiers by channel count, input options, and system fit to choose the right BOSS amp for your build.

The core difference: channels decide the job

The OX4.400 and R1100M-S share a lot on paper—both are Class A/B, 2Ω stable, and use a PWM MOSFET power supply—but they are built for different roles. The OX4.400 is a 4/3/2 channel full-range amplifier, so it can drive four speakers, three speakers plus a sub, or two speakers bridged. The R1100M-S is a monoblock, meaning it is designed around a single output channel, typically for a subwoofer.

That channel count is the first filter. If you need to power front and rear speakers from one amp, the OX4.400 is the natural candidate. If you already have a separate amp for your speakers and need dedicated bass power, the R1100M-S fits that lane. Neither amp is 'better' in isolation—they solve different problems.

OX4.400: what the catalog confirms

  • OX4.400: 4/3/2 channel, full-range, Class A/B This flexibility lets you run a full speaker system or bridge channels for a sub, so it can anchor a simple single-amp build.
    OX4.400
    OX4.400
  • OX4.400: RCA and speaker-level inputs Speaker-level inputs mean you can connect it to a factory head unit that lacks RCA preouts, which is common in basic upgrades.
  • OX4.400: HP and LP filters, bass boost, remote subwoofer control These tuning tools help you separate bass from midrange and adjust sub level from the driver's seat—useful if you plan to run a sub on the bridged channels.

R1100M-S: what the catalog confirms

  • R1100M-S: Monoblock, full-range, Class A/B A single-channel design simplifies subwoofer wiring and avoids paying for channels you won't use in a bass-focused system.
    R1100M-S
    R1100M-S
  • R1100M-S: RCA and speaker-level inputs Like the OX4.400, it can accept a factory speaker-level signal, so it works with stock head units that lack preouts.
  • R1100M-S: Low pass filter, bass boost, input sensitivity, remote subwoofer control The low-pass filter and input sensitivity let you tailor the amp to a subwoofer and match the signal from your head unit; remote control adds dash-level bass adjustment.

Shared features that narrow the decision

Both amps carry thermal, short, and overload protection circuits, so basic reliability safeguards are present on either model. Both are 2Ω stable, which gives you flexibility in speaker or subwoofer impedance—but only within the limits of your specific speakers and wiring. Neither record lists power output figures, so you cannot compare wattage from the supplied information. That absence matters: if your decision hinges on exact RMS power, you will need to confirm it from the full product documentation before buying.

Both also include bass boost and remote subwoofer control, which is more unusual on a full-range 4-channel amp and makes the OX4.400 a viable single-amp solution for a simple system with a sub. The R1100M-S adds input sensitivity, a useful adjustment when matching a factory head unit's signal level to a sub amp.

Which amp fits your system?

  • You have four speakers and no separate sub amp: The OX4.400's 4-channel layout lets you power all four speakers from one unit. If you later add a sub, you can bridge two channels or run the sub on the remaining channels depending on your configuration.
  • You have a subwoofer and already power speakers separately: The R1100M-S monoblock keeps the install focused on bass. Its low-pass filter and input sensitivity are aimed at subwoofer duty, and you avoid paying for unused channels.
  • You are upgrading a factory system with no RCA preouts: Both amps offer speaker-level inputs, so either can take a signal from a stock head unit. Choose based on whether you need four speaker channels (OX4.400) or a single sub channel (R1100M-S).
  • You want one amp to run speakers and a sub: The OX4.400's 3-channel mode (front speakers plus bridged sub) or 2-channel bridged setup can serve this role. The R1100M-S cannot power four separate speakers because it has only one output channel.

What the catalog does not confirm

The supplied records do not include power output ratings, dimensions, or detailed installation steps for either amplifier. That means you should not assume the OX4.400 produces more total power than the R1100M-S, or vice versa. Before you buy, check the full specifications for RMS power at your planned impedance, and confirm the physical size fits your mounting location. The catalog also does not state whether either amp includes a remote bass knob in the box—only that remote subwoofer control is a feature—so verify the included accessories if that matters to you.

Finally, neither record confirms compatibility with specific speaker models or head units beyond the input types listed. Use the RCA or speaker-level inputs as your guide, and match your speakers to the amp's 2Ω stability and power ratings once you have the full specs.

Related Articles

Customer Service
Home
Products
Cart
Profile