Start with the BRT18A's clamp range, not the vehicle
The BRT18A is an all-terrain sound bar with a multi-fit clamp system listed for 1.75" and 2" outside diameter bars. Before you plan any off-road sound bar setup, measure the bar you intend to clamp to and confirm it falls within that range. A clamp that does not match your bar is the first thing that will stop the install, and no amount of wiring work will fix it.
The catalog does not list a vehicle-specific fitment list, so treat the clamp range as the compatibility check you can actually make. If your bar measures outside those two sizes, the supplied information does not confirm that the BRT18A will mount safely.
BRT18A catalog facts that shape the install plan
- BRT18A: Multi-Fit Clamp System (1.75", 2" O.D.) This is the only mounting measurement the catalog confirms, so check your bar diameter against it before anything else.

BRT18A - BRT18A: IPX5-Rated (Weatherproof/Dustproof) The rating tells you the enclosure is built for wet, dusty conditions, but it does not replace sealing or routing checks at your connections.
- BRT18A: Aluminum Enclosure w/Internal H.D.S. (Heat Dissipation System) The enclosure is designed to manage heat internally, which matters when the bar is mounted in direct sun or a tight spot.
Plan the audio path before you run power
The BRT18A accepts audio from the output of iPod/iPhone, smartphones and MP3 players, and it provides both USB and Aux-In connections. Decide which source you will use first, because that choice determines which cable you need to route and where the bar should sit relative to the driver or passenger.
The catalog does not confirm Bluetooth or any wireless audio standard, so do not plan the install around a wireless connection. If you want to use a phone, use the Aux-In or USB path the catalog actually lists and keep the cable accessible.
A practical order for BRT18A mounting and wiring
- Measure the bar first: Confirm your mounting bar is within the 1.75" or 2" outside diameter range the clamp system supports. Stop and rethink the location if it is not.
- Choose a location with heat and weather in mind: The aluminum enclosure and internal heat dissipation system are designed to help, but the catalog does not give clearance or airflow figures. Pick a spot that avoids trapping the bar against hot surfaces and keeps the IPX5-rated enclosure exposed as intended.
- Route the audio cable before tightening the clamps: Connect your Aux-In or USB source cable and check that it reaches your device without strain. The catalog does not list cable lengths, so test the route before final mounting.
- Connect power last: The catalog does not list a fuse rating, wire gauge or recommended power source. Use the vehicle or powersports manufacturer's guidance for the circuit you tap, and confirm the connection is secure before powering up.
- Test the controls and remote: The BRT18A has illuminated soft-touch controls and a wireless remote. Check that both respond before you finish dressing cables.
Inputs and controls the BRT18A actually provides
- BRT18A: Compatible w/ Audio Output of iPod/iPhone, Smartphones, and MP3 Players; USB; Aux-In These are the confirmed audio paths, so build your source plan around a wired connection rather than assuming wireless playback.
- BRT18A: USB Charging (1A) The USB port can charge a device at 1A, which is useful for a phone running navigation, but it is not a high-current fast-charge port.
- BRT18A: Illuminated Soft Touch Controls; Wireless Remote Control You can operate the bar from the bar itself or the remote, which matters when the mounted position is out of easy reach.
Power wiring: what the catalog settles and what it leaves to you
The supplied record does not include a fuse rating, wire gauge, or a recommended connection point for the BRT18A. That means sound bar power wiring has to follow the guidance for your specific vehicle or powersports machine rather than a number pulled from this article. Check the circuit you plan to use, confirm it can carry the load, and protect it according to the manufacturer's instructions.
The catalog does list USB charging at 1A, so keep that in mind when you decide what to plug in. A phone that is charging and playing audio over the same USB connection is doing two jobs, and the 1A rating is the only charging figure the catalog confirms.
First setup checks before you call it done
Once the bar is clamped and powered, work through the basics in order. Confirm the source device is connected to the input you intended, raise volume gradually from the bar's soft-touch controls, and test the wireless remote from the position where you will actually use it. The catalog does not list a remote range, so test it in place rather than assuming it will work from a distance.
Because the BRT18A is IPX5-rated, it is reasonable to expect it to handle wet and dusty conditions, but the rating applies to the enclosure as supplied. Check that your cable connections are not left hanging where water can pool, and revisit the clamps after the first ride or drive to make sure nothing has shifted.
What the BRT18A information does not confirm
The supplied record does not confirm Bluetooth, a specific fuse size, wire lengths, or a vehicle fitment list beyond the clamp diameters. It also does not include step-by-step installation instructions from the manufacturer. Treat those gaps as decisions you need to make with your vehicle's documentation or a qualified installer, not as features the bar is missing.
If you need a sound bar that connects wirelessly, the BRT18A catalog does not give you that assurance. If you need a bar that clamps to a 1.75" or 2" bar, plays wired audio and includes a remote, the BRT18A is a straightforward fit for that plan.

