Back to Blog
How-to Guides 2026-11-16 BOSS Audio Systems | Life at Full Volume 0 views

MPWT50RGB Waketower Speakers: RGB Lighting and Wiring Setup

MPWT50RGB Waketower Speakers: RGB Lighting and Wiring Setup

Plan your MPWT50RGB waketower install around the confirmed facts: IPX6 rating, wireless RF remote lighting control, and pair packaging. Here is what to verify before you drill.

Start with what the MPWT50RGB packaging actually gives you

The MPWT50RGB is sold in pairs, so your first decision is whether one pair covers both sides of the tower or whether you need a second pair for a four-speaker layout. The catalog lists a 2-way system with a neo dome tweeter and a midbass driver, plus a butyl rubber surround and poly injection cone. Those are the driver materials you are mounting and protecting, not installation instructions.

The lighting is controlled by a wireless RF remote, and the system offers 20 color illumination options with multi-pattern illumination. That remote is the only lighting control method named in the supplied information, so plan your install around keeping the remote accessible rather than assuming a wired lighting controller or app control.

The IPX6 rating is the weatherproof/dustproof claim you can plan around. It tells you the speaker is rated for water and dust exposure, but it does not tell you which mounting angle, screw location, or wire entry point keeps that rating intact. Those details are not confirmed in the supplied information, so treat them as decisions to verify with the full manufacturer documentation before you drill.

MPWT50RGB facts that shape your install plan

  • MPWT50RGB: Sold in pairs Order quantity and tower layout depend on whether one pair covers both sides or you need two pairs.
    MPWT50RGB
    MPWT50RGB
  • MPWT50RGB: IPX6-rated (weatherproof/dustproof) Confirms the speaker is rated for water and dust exposure, but does not confirm mounting angles or wire-entry sealing.
  • MPWT50RGB: Wireless RF remote control with 20 color illumination options and multi-pattern illumination Lighting is remote-controlled, so plan remote storage and range rather than a wired lighting switch.
  • MPWT50RGB: Max power: 500W This is the catalog's maximum power figure, not a confirmed continuous RMS rating or amplifier matching spec.

A practical order for mounting and wiring the MPWT50RGB

The supplied information does not include a step-by-step mounting procedure, so the sequence below is an installation-planning order built from the confirmed facts. Adjust it to your tower and to the full manufacturer documentation.

  1. Confirm your tower mounting points before buying hardware: The catalog does not list a clamp diameter, bolt pattern, or mounting bracket specification. Measure your tower and check the full product documentation for the mounting interface before you commit to a location.
  2. Plan the speaker wire path before the lighting remote: The catalog confirms a 2-way speaker system but does not confirm terminal type, wire gauge, or connector style. Route speaker cable along the tower with enough slack for the final angle, and check the terminals on the product before you cut wire.
  3. Decide where the wireless RF remote will live: Because lighting is controlled by a wireless RF remote, you need a dry, reachable spot for it. The supplied information does not confirm remote range or battery type, so test the remote from your planned storage position before final mounting.
  4. Set the lighting pattern before you tighten everything down: With 20 color options and multi-pattern illumination, confirm the remote responds and the pattern you want is selected while you can still reach the wiring. This is a check, not a confirmed programming procedure.
  5. Check the IPX6 boundary at every penetration: The IPX6 rating covers the speaker enclosure, but the supplied information does not confirm how wire entries or mounting holes should be sealed. Inspect each penetration and follow the manufacturer's guidance for sealing.

What the catalog settles about power and what it leaves to you

The MPWT50RGB lists a 500W max power figure. That is a maximum, not a confirmed RMS rating, and the supplied information does not include impedance, sensitivity, or frequency response. Without those figures, you cannot confirm amplifier matching from this record alone. Check the full product documentation for the impedance and RMS rating before you choose an amplifier channel or set gain.

The catalog also does not confirm whether the speakers include a crossover, whether the tweeter and midbass are separately wired, or what input connections are provided. Those details affect how you wire the pair, so verify them on the product and in the documentation rather than assuming a standard two-terminal connection.

RGB lighting: keep the remote in the plan, not as an afterthought

The wireless RF remote is the confirmed control path for the 20 color options and multi-pattern illumination. That means your install plan should include a mounting or storage location for the remote that is reachable from the helm or seating area, and protected from the same water and dust the speakers are rated against.

The supplied information does not confirm whether the lighting requires a separate power wire, whether it runs from the speaker input, or what voltage the lighting circuit expects. Do not assume the lighting is powered from the audio signal. Check the product documentation for the lighting power requirement before you run any additional wire.

If you are planning a wakeboard tower speaker wiring layout with multiple pairs, remember that each pair ships with its own wireless RF remote. The supplied information does not confirm whether one remote can control multiple pairs, so plan for separate remotes unless the documentation says otherwise.

Fit and finish checks before you call the install done

The MPWT50RGB is an all-terrain system with a butyl rubber surround and poly injection cone. Those materials are built for outdoor exposure, but the catalog does not confirm UV rating, operating temperature range, or long-term saltwater resistance. If your tower sees salt spray, rinse and inspect according to the manufacturer's care guidance rather than assuming the IPX6 rating covers every exposure.

Before final tightening, check that the speaker angle clears your tower geometry, that the wire has no sharp bend at the entry point, and that the remote responds from the mounted position. The supplied information does not confirm a torque specification or a minimum clearance, so use the hardware and guidance that come with the product.

Related Articles

Customer Service
Home
Products
Cart
Profile